English
Русский
日本語
한국어
Francés
العربية
Deutsch
Español
Português
हिन्दी
اردو
বাংলা
Ελληνικά
ไทย
Türk
Việt
A technical performance:The production line can produce snowflakes, meringues, and cereals. It is an integrated machine for continuous spreading, shaping and cutting. It adopts frequency conversion adjustment, and the cutting size is accurate and the molding squareness is good. The whole machine is produced continuously without manual connection in the middle.
Contact Now
Main features of VINCI single screw extruder 1. The feeding, rotary cutting and main drive all adopt the frequency conversion speed regulation system, which has strong power and stable operation. 2. The extrusion system is equipped with six sets of temperature control and automatic cooling devices, and the temperature control is accurate and stable. 3. Suspended mold (knife) set seat, which can improve the replacement speed of molds and knives. 4.
Contact Now
Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.
Contact Now
Equipment Introduction Of Snack Products Bugles Shaper:This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite.
Contact Now
Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance. technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70～80㎏/hDimensions: 1700×1000×1800mm
Contact Now
The Fried Puffed Food Production Line Is Suitable For Extruding Flour And Other Raw Materials Through An Extruder, Rolling And Cutting Into Various Shapes Through A Compound Molding Machine, And Then Seasoning After Frying, Making Delicious Snack Foods. The Equipment Design Of The Production Line Is Reasonable And The Operation Is Simple. This Equipment Can Also Produce Products Of Various Shapes Such As Rice Crackers, Triangles, Gourd-Shaped, Small Fish Crisps, Golden Horns And So On. The Product Is Beautiful In Appearance, Crispy In The Mouth, And Rich In Nutrition.
Contact Now
Extruded pasta/pasta production line generally uses special flour as raw material, its production process includes mixing, extrusion curing, molding, cutting, drying, etc., the equipment is automatically controlled, to achieve automatic production line. Its products include extruded noodles such as knife-cut noodles (an upgrade of instant noodles), various shapes of pasta (such as hollow tubes, shell shape, rice grain shape, etc.);The production line is flour, corn starch, potato starch as raw materials, after extrusion, curing, forming, drying, frying, puffing of a snack.
Contact Now
Main features of SLG85-D twin-screw extruder 1. The feeding, rotary cutting and main drive all adopt the frequency conversion speed regulation system, which has strong power and stable operation. 2. The extrusion system is equipped with six sets of temperature control and automatic cooling devices, and the temperature control is accurate and stable. 3. Suspended mold (knife) set seat, which can improve the replacement speed of molds and knives. 4.
Contact Now
Pet food production line endues pup food with the amount of nutrients, digestible structure, novel shape, and unique flavor to meet with the dreams of cutting-edge market. the canine chewing food is extruded into a ramification of shapes in conjunction with stick, bone, and so on.
Contact Now
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.
Contact Now
The fried wheat flour snack production line is a new technology that replaces traditional cooking Guoba production with twin screw extrusion technology. This production line is a high-quality production line that has been successfully developed and innovated by the company's scientific and technological personnel. It integrates raw material mixing, steaming, ripening, puffing, forming, frying, and seasoning. The production process is simplified, efficient, and environmentally friendly.
Contact Now
This technique line is newly designed and produced with overseas superior generation. it has stepped forward the dangers of import system consisting of huge funding and excessive production value. this line makes use of corn starch, wheat flour, potato starch as substances to supply"bugles", "net", "potato chips" and plenty of different 3-D compound extrusion food. this line can be in comparison with the ones import equipments. beneath the same features, its fee is only one 10th of that of import equipment.
Contact Now
Equipment introductionThis machine is the supporting equipment for the pasta host. This machine is required when the main engine produces traction cut. Both straight and oblique cuts can be produced. The machine has reasonable equipment, beautiful appearance, and is equipped with an advanced frequency conversion speed regulation system.Schematictechnical parameter:Cut off drive power: 0.55KWTraction drive power: 0.37KWDimensions: 2300×830×1100mmProduction capacity: with the hostWeight: 250kgInstallation and corresponding adjustment1.
Contact Now
This puff snack making device can use corn, rice, and other grain powder as raw substances to provide immediately puffed snacks in variou shapes, along with chip, ball, ring, stick, flake, flower, and so forth. after dried and flavroed, the snacks are crispy and tasty which are very popular inside the marketplace.
Contact Now
Tortilla chip technique line uses corn powder, corn starch, and rice powder as primary cloth which may be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy taste, wealthy vitamins and digestible form are very famous with many human beings everywhere in the worldwide.
Contact Now
Triangle and doritos chip production line is mainly made of corn flour and rice flour as main raw materials, which are extruded, calendered into thin slices of various shapes, and then baked and flavored. It has become a best-selling food for all ages at home and abroad because of its advantages of crispy, delicious, long-term eating and easy digestion. Triangle and doritos chip production line integrates extrusion, molding and other production processes, with a high degree of automation.
Contact Now
The nutritional rice production line takes grains as the main raw materials (corn flour, rice flour, millet flour, flour, etc.), vegetables, fruits, eggs, meat and other selective ingredients, and adds minerals such as calcium, phosphorus, iron and vitamins.
Contact Now
This method line is newly designed and produced with foreign places advanced era. it has improved the dangers of import tool which consist of huge funding and immoderate manufacturing fee. this line uses corn starch, wheat flour, potato starch as materials to deliver"bugles", "net", "potato chips" and hundreds of numerous 3-d compound extrusion meals. this line can be in assessment with those import equipments. under the same capabilities, its price is high-quality one tenth of that of import machine.
Contact Now
Fruit and vegetable food production line generally consist of the following food processing equipment.1. Fruit elevatorHigh lift machine used for fruit cleaning and conveying to crushing station after fruit picking.2. Fruit washerUsed for ordinary fruit cleaning and preliminary selection and carrot cleaning degree of high requirements of fruit cleaning.Step 3: CrusherHammer crusher and squirrel cage crusher are used for the initial crushing of fruits and vegetables.4.
Contact Now
Textured vegetable protein making machine is made from low temperature defatted soy flour, wheat protein, soybean and remoted protein because the number one uncooked materials, and produced thru mixing, cooking, and extruding in the double-screw extruder under excessive temperature and high pressure. the fiber soy protein is in sturdy muscle fiber shape with excessive tenacity that may keep suitable water and oil absorption potential, so it may be appreciably used in meat, fast food, straight away meals, fillings as vegetarian meat.
Contact Now
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market. This Puff Snack Machine Is Characteristics Of Simple Opeation, Reasonable Structure, Low Consumption, And High Efficiency, Which Make It The Best Choice For Medium Factory.Schematic diagram of production line
Contact Now
Equipment introductionThe dryer is composed of a heating room and a material room. The main equipment includes heating equipment, ventilation and moisture removal equipment, and temperature and humidity control equipment. It has good coordination for the four baking factors (water, fire, wind and time) of the baking environment. In the process of following the laws of nature, the natural properties of the hot and cold air flow are used to promote the natural circulation of the hot air in the drying box.
Contact Now
Equipment overview:The machine uses the burner for heating, and adopts the drum rotary drying method. It can dry corn flakes, etc. The machine dries evenly, so that the material can achieve the best drying effect.This machine is equipped with advanced temperature control device, which makes the drying temperature set according to different materials accurate and reliable, thus ensuring the excellent quality of drying materials.Equipment structure Device parameters1. Drum drive power: 0.37KW2. Drum size: φ630x2700mm3. Dimensions: 3300×1170×1900mm Precautions1.
Contact Now
1. The feeding, rotary cutting and main drive all adopt the frequency conversion speed regulation system, which has strong power and stable operation. 2. The extrusion system is equipped with six sets of temperature control and automatic cooling devices, and the temperature control is accurate and stable. 3. Suspended mold (knife) set seat, which can improve the replacement speed of molds and knives. 4. Double helix forced feeding and photoelectric eye tracking can make the material added evenly and prevent material shortage. 5.
Contact Now
