FQ90 Pulling Cutter-manufacture,factory,supplier from China

1. Cold chain On October 13, the "National Food Safety Standard   Hygienic Specification for Food Cold Chain Logistics" drafted by the National Food Safety Risk Assessment Center, the Cold Chain Committee of China Internet of Things and other units was released and will be officially implemented on March 11, 2021. The specification covers the requirements and management guidelines for the handover, transportation, distribution, and storage of food in the cold chain logistics process.

Now puffed food has always been very popular, and many companies and businessmen have seen the profits. In fact, puffed food machinery is the same as food machinery, not only to meet the production conditions that the machinery and equipment should have, but also to meet the various conditions required for food processing. Judging from the current development phenomenon, the procurement of extrusion and puffing machinery should be considered from four aspects.1. Scale applicability.

Screw extruder is mainly used in the production of starch extruded food, protein extruded food and extruded feed in the food industry, and can also be used as a special chemical or biochemical reactor.Starch puffed foodThe starch in the grain will gelatinize (αize) under the high temperature and pressure of the extruder. The results showed that the degree of starch αization was more than 98% and the crude fat decreased by 60% or even disappeared after the puffed corn flour. Water solubility increased by more than 40%. Therefore, extruder can replace roller dryer to produce gelatinized starch.

The pet chew production line is specially used for the production of dog chew products. It uses a unique extrusion method and mold to produce strip, rod, twist, two-color or multi-color chews with various shapes and sandwiches.1. Process flow of dog chewsRaw material preparation → mixing → extrusion molding → cooling and conveying → cutting machine → conveying → drying → packaging.2. Configuration and introduction of dog chewing equipment①Mixing machine→②Screw conveyor→③Single screw extruder→④Cooler→⑤Cut off machine→⑥Elevator→⑦Oven.1.

1. The equipment should be cleaned inside and outside after each shift of production. In particular, there should be no residual materials in the puffing chamber, so as to avoid agglomeration after cooling, which is difficult to clean up. In summer, pay attention to the deterioration of high-temperature raw materials.2. The large pulley of the main shaft of the extruder should be cleaned frequently, and no dust should be collected, otherwise the pulley will be unbalanced and the extruding chamber will vibrate.3.

With the continuous improvement of the national economic level, seafood and aquatic products have gradually become frequent customers on consumers' tables, and the consumption has been rising. In this context, the shellfish aquatic products represented by clams provide a new path for the revitalization of local villages and the increase of villagers' income. Large-scale clams industries have emerged in various places, and the industrial chains of clams breeding, fishing, and processing have been accelerated.

Screw and barrelTwin-screw extruders, as the name implies, have two screws whose function is to push the material forward. This helps distribute heat into the resin in an even manner. You can use different types of twin screws. This includes co-rotating screws, where the screws rotate in the same direction. We also have counter-rotating screws, which rotate in the opposite direction.Screws are said to engage each other when the centerline between their axes is exactly less than the diameter of the screw.

Twin screw extruder to keep clean can produce better products, keep clean can also reduce the occurrence of failure rate, ensure the continuous production, twin screw extrusion equipment maintenance basic elements - inspection, cleaning.The inner wall of cooling water pipe attached to twin screw extrusion equipment is easy to scale, and the outside is easy to rust and corrosion. The maintenance should be carefully checked.

　　The 3D pellet production line developed by our company mainly uses potato starch, Corn starch, etc. as raw materials to produce the popular secondary puffed food in the market with different shapes, such as pea crisps, shells, spirals, square tubes, round tubes, waves, etc. This production line has a unique process, reasonable configuration, high degree of automation, stable performance, and no need to configure a boiler.

Extruder belongs to a kind of equipment for processing puffed food. It is a kind of equipment for processing puffed food, such as processing rice, corn, soybean, wheat, etc., in daily life.